Increase the numeric value to change the boot order. When prompted, type the number of the disk drive that is attached to the HBA card you just installed and press Enter. Verify that no errors have occurred by checking the SunVTS status window. Refer to Software Installation for instructions on downloading and installing mpt driver patches. Verify that no error occurred, as indicated by the output line Total of 0 defective blocks repaired. Starting with the 7.
|Date Added:||6 April 2004|
|File Size:||17.60 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
At the ok prompt, type the probe-scsi-all command to verify that the system recognizes the HBA. Verify that no errors have occurred by checking the SunVTS status window. In the Save As dialog box, enter a destination directory for the patch cluster, and click the OK button.
To exit this screen, press the Escape key.
In the Save As dialog box, enter a destination directory for the patch, and click the OK button. Install the bracket screw, when present, or engage the retention mechanism on the system to secure the HBA to the chassis of the system. Hga following screen is displayed. Under Utilities, click Linux to download the Linux utility program, lsiutil.
This chapter contains the following topics:. To Prepare for Hardware Installation. Contact your service provider if an error occurs. To Download and Update the Windows Firmware.
Type read to further define the jba of test, and then type y to continue.
Supermicro LSI SAS3008 HBA Review
Starting with the 7. The first sas 2 is the SAS controller resident on the motherboard. As superuser, open the SunVTS window. Click to select and download the specific Windows driver that is supported by the Windows release on your jba platform.
Decrease the numeric value to change the boot order. Remove the cover from the chassis of the mptt. Under Firmware, click to download the firmware zip file and the corresponding Readme file.
To inform any mounted users that the system will be going down, use the shutdown command. See the man pages or the Oracle Solaris documentation for more information about these commands. Under Utilities, click Windows to download the Windows utility program, lsiutiland to download the corresponding Readme hha.
Consult the Sun hardware platform documentation to determine which Windows releases are supported. The required Solaris patches are available for download at:. This example shows two SAS controllers.
LSI SAS 9300-8i and 9300-8e HBAs Review
Click the browser’s Back button to return to the previous page. The BIOS initialization screen is displayed.
The array has four bonded PHYs. Refer to Software Hab for instructions on downloading and installing mpt driver patches. Bring the system down to the ok prompt at run level 0. Use the Solaris raidctl utility to upgrade firwmware.
C H A P T E R 3 – Installing the HBA Software
Always handle the HBA with care to avoid damage to electrostatic sensitive components. Print or save the patch hbq from the browser window. To change other options, move the grey highlighted field to the appropriate HBA, and press Enter.